Application Notes

You may contact support@lorentzsolution.com or fill out our request form below to request for your interested application notes listed below.

TOPIC BY CATEGORY

 

CAD INFRASTRUCTURE

  • Prepare Peakview Devices for TSMC Process LVS Check
  • GDS streaming in Peakview
  • How to Use Your File Manager Account
  • Inductor Temp Variation
  • Peakview scripting
  • Peakview Encryption of Process Information
  • Peakview integration with Laker
  • PeakView Interface to PostTirgger functions
  • iRCX Profile Conversion in Batch Mode
  • LVS PEX flow for peakview devices
  • Peakview temperature and corner sweep
  • Peakview integration with design environment
  • Peakview Profile Generation Protocol
  • Import and export GDSII and ODB++ using PeakView
  • Peakview Pcircuit Stripping, Slotting
  • Peaview ITF file Parser
  • IRCX file parser
  • Peakview profile for advanced process nodes
  • Special profile rules for path slotting, stripping and via
  • Setting up HFD profile on a PeakView profile
  • Peakview installation instruction
  • Peakview’s Connectivity Rules in Profile
  • ADE-XL Corner Analysis Integration
  • LSF and multithreading parallel computation setup
  • Transfer PCB (.brd) file from allegro to GDSII

CASE STUDIES

  • Case study of modeling VCO critical net with device using HFD
  • PeakView improvements to handle package case
  • 20nm VCO Silicon Comparison with PeakView HFD
  • 20nm silicon correlation [LD 6757]
  • Scalable model development process in Peakview
  • 20nm de-embedding process in Peakview
  • 60GHz Transformer Design using Peakview
  • Impedance matching with transformer
  • Clock Tree modeling with  PBM
  • VCO critical net modeling using HFD-L
  • Modeling of interconnect coupling with inductors
  • Inductor Temp Variation case study update
  • HFD flow for device and interconnect using groups

EM RELATED

  • Loss Tangent Formulation for Semiconductors in PeakView
  • combined vs distinct layer stack-up at mm-wave frequencies
  • Modeling of Skin Effects in Peakview
  • How to customize simulation types
  • Guard Ring Stair Structure Setting
  • Peakview Accuracy Rule Table Explained
  • Substrate Isolation Analysis using Peakview
  • Pin Property and Handling in PeakView
  • PeakView EM Simulation Setup
  • Multi-sheet Current Option for Stacked Thick Metals
  • Peakview metal fill modeling and enhancements
  • Mesh setting for transmission line with slotting shield

MODELING

  • Peakview Inductor Models and Views
  • Using charting to compare device characterization results
  • Comparing Single Ended vs Diff Ended Inductors
  • Capacitance Extraction for shielded transmission line
  • Extracting  Zc from S-parameter
  • Generation of Physics-Based Model for Finger Cap
  • Using Hierarchical PBM and HEM Auto to create lumped model
  • PeakView Physical-Based Modeling (PBM) for transmission line
  • PBM for transmission line Passivity Check
  • zd and differential transformer parameters
  • Rapid scalable model generation based on PeakView platform
  • Mixed Mode S-Parameter for Differential Structures

P-CIRCUITS

  • Peakview Pcircuit parameter explained: AdvSymmetric Pcircuit
  • LinePairs PCircuit and parameters
  • PCircuit Wrapper
  • Peakview Pcircuit for Transmission Lines
  • Stacked Balun Parameters Definitions
  • PCircuit For Inductors With Flexible Cross Width
  • Advanced Balun Pcircuits
  • How to load pcircuit and PBM file into PeakView

SPECIAL TOPICS

  • De-Embedding analysis based on Peakview EM simulation
  • Inductive Impact of Floating Package Structure
  • MIM CAP Simulation with Peakview
  • MOM Cap Biasing Effect Considerations in Peakview
  • PeakView General Purposed Biasing Effect Setting in Profile
  • TSMC 60GHz passive device correlation with Silicon
  • Applying Peakview for EM isolation consideration in RFIC design
  • PeakView Application in Transformer Design, Characterization
  • PeakView PBM modeling for transmission line
  • Rapid T-coil synthesis and optimization in Peakview
  • MOMCap Simulation in PeakView
  • PeakView-based Rapid RF Silicon Characterization
  • Usig PeakView for Metal Fill Generation

OVERVIEW

  • Hierarchical PBM (HPBM) introduction
  • Peakview Comprehensive PBM Introduction
  • PeakView EM Platform for Foundry Users
  • PeakView turnkey solution for scalable model generation
  • Lorentz EM Automation Flow Overview

TRAINING & EDUCATION

  • Design and Model Inductors using Peakview
  • Simulation of Transmission Line Using Peakview
  • TSMC 16FF Inductor design using Peakview
  • TSMC 65nm RDK 2.0 QRC HFD
  • Compact RF EM Design Using PeakView HFD
  • Peakview Pcircuit Training
  • PeakViewTrainingLab
  • Peakview Tutorial

GENERAL TOPICS

  • Integrate PeakView with Your Design Environment and PDK.
  • Prepare PeakView Profile from iRCX/ITF.
  • Peakview Scripting for Automated Batch Mode Simulation.
  • Customize PeakView Simulation for Various Applications.
  • Simulation Your Design in GDS Format.
  • Setup PeakView for MIM CAP Simulation.
  • Encryption of Process Information.
  • Peakview Profile for 20nm Node and Beyond.
  • Properly Configure Pin Property for Accurate Simulation in PeakView.

Application Note Request Form



CAD Infrastructure

Prepare Peakview Devices for TSMC Process LVS CheckGDS streaming in PeakviewHow to Use Your File Manager AccountInductor Temp VariationPeakview scriptingPeakview Encryption of Process InformationPeakview integration with LakerPeakView Interface to PostTirgger functionsiRCX Profile Conversion in Batch ModeLVS PEX flow for peakview devicesPeakview temperature and corner sweepPeakview integration with design environmentPeakview Profile Generation ProtocolImport and export GDSII and ODB++ using PeakViewPeakview Pcircuit Stripping, SlottingPeaview ITF file ParserIRCX file parserPeakview profile for advanced process nodesSpecial profile rules for path slotting, stripping and viaSetting up HFD profile on a PeakView profilePeakview installation instructionPeakview’s Connectivity Rules in ProfileADE-XL Corner Analysis IntegrationLSF and multithreading parallel computation setupTransfer PCB (.brd) file from allegro to GDSII

Case Studies

Case study of modeling VCO critical net with device using HFDPeakView improvements to handle package case20nm VCO Silicon Comparison with PeakView HFD20nm silicon correlation LD 6757Scalable model development process in Peakview20nm de-embedding process in Peakview60GHz Transformer Design using PeakviewImpedance matching with transformerClock Tree modeling with PBMVCO critical net modeling using HFD-LModeling of interconnect coupling with inductorsInductor Temp Variation case study updateHFD flow for device and interconnect using groups

EM Related

Loss Tangent Formulation for Semiconductors in PeakViewcombined vs distinct layer stack-up at mm-wave frequenciesModeling of Skin Effects in PeakviewHow to customize simulation typesGuard Ring Stair Structure SettingPeakview Accuracy Rule Table ExplainedSubstrate Isolation Analysis using PeakviewPin Property and Handling in PeakViewPeakView EM Simulation SetupMulti-sheet Current Option for Stacked Thick MetalsPeakview metal fill modeling and enhancementsMesh setting for transmission line with slotting shield

Modeling

Peakview Inductor Models and ViewsUsing charting to compare device characterization resultsComparing Single Ended vs Diff Ended InductorsCapacitance Extraction for shielded transmission lineExtracting Zc from S-parameterGeneration of Physics-Based Model for Finger CapUsing Hierarchical PBM and HEM Auto to create lumped modelPeakView Physical-Based Modeling (PBM) for transmission linePBM for transmission line Passivity Checkzd and differential transformer parametersRapid scalable model generation based on PeakView platformMixed Mode S-Parameter for Differential Structures

P-Circuits

Peakview Pcircuit parameter explained: AdvSymmetric PcircuitLinePairs PCircuit and parametersPCircuit WrapperPeakview Pcircuit for Transmission LinesStacked Balun Parameters DefinitionsPCircuit For Inductors With Flexible Cross WidthAdvanced Balun PcircuitsHow to load pcircuit and PBM file into PeakView

Special Topics

De-Embedding analysis based on Peakview EM simulationInductive Impact of Floating Package StructureMIM CAP Simulation with PeakviewMOM Cap Biasing Effect Considerations in PeakviewPeakView General Purposed Biasing Effect Setting in ProfileTSMC 60GHz passive device correlation with SiliconApplying Peakview for EM isolation consideration in RFIC designPeakView Application in Transformer Design, CharacterizationPeakView PBM modeling for transmission lineRapid T-coil synthesis and optimization in PeakviewMOMCap Simulation in PeakViewPeakView-based Rapid RF Silicon CharacterizationUsig PeakView for Metal Fill Generation

Overview

Hierarchical PBM (HPBM) introductionPeakview Comprehensive PBM IntroductionPeakView EM Platform for Foundry UsersPeakView turnkey solution for scalable model generationLorentz EM Automation Flow Overview

Training & Education

Design and Model Inductors using PeakviewSimulation of Transmission Line Using PeakviewTSMC 16FF Inductor design using PeakviewTSMC 65nm RDK 2.0 QRC HFDCompact RF EM Design Using PeakView HFDPeakview Pcircuit TrainingPeakViewTrainingLabPeakview Tutorial

General Topics

Integrate PeakView with Your Design Environment and PDK.Prepare PeakView Profile from iRCX/ITF.Peakview Scripting for Automated Batch Mode Simulation.Customize PeakView Simulation for Various Applications.Simulation Your Design in GDS Format.Setup PeakView for MIM CAP Simulation.Encryption of Process Information.Peakview Profile for 20nm Node and Beyond.Properly Configure Pin Property for Accurate Simulation in PeakView.


Comments are closed